ELECTRICAL CHARACTERISTICS
| Max. Conductor DC Resistance (Ω/km) |
148 |
| Min. Insulation Resistance (ΩM-KM) |
5000 |
| Dielectric Strength |
DC-1KV/1 Min |
| 1.0-100MHZ Characteristic Impedance(ohms) |
100 ±15 |
| 1.0-100MHZ Delay Skew(ns/100m) |
≤45 |
|
Pair to Ground Capacitance
Unbalance(Pf/100m) |
≤330 |
| Resistance Unbalance(%) |
≤4 |
| Max Mutual Capacitance (nF/100m) |
5.6 |
| Before Aging |
Tensile Strength(Mpa) |
≥13.5 |
| Elongation(%) |
≥100 |
| After Aging
100℃*24h*7d |
Tensile Strength |
≥75% |
| Elongation(%) |
≥50 |
| Velocity of Propagation NVP |
69% |
CONSTRUCTION
| Conductor Material |
Stranded Bare Copper |
| Conductor Number |
8C(4 pairs) |
| Cable AWG |
26 |
| Construction(±0.01mm) |
7/0.16；7/0.18；7/0.2 |
| Rip Cord |
No |
| Insulation |
Material |
PE |
| Nom. Thickness(mm) |
0.21 |
| Diameter(±0.05mm) |
0.90 |
| Jacket |
Material |
PVC；LSZH |
| Nom. Thickness(mm) |
0.75 |
| Diameter(±0.30mm) |
5.80 |
TECHNICAL SPECIFICATION
♦ 6-50 micron RJ-45 staggered gold plated connectors
♦ Fitted with strain relief boots
♦ With or without reports made to the order
♦ 100% Tested Wiring Sequence and Continuity
♦ Excellent Attenuation and Crosstalk Characteristics
♦ Connector with staggered pin configuration to limit cross talk
♦ Exceed Category 6A requirement
♦ They are available in a variety of the lengths
APPLICATIONS
Connection between computer network card and module, connection between distribution frame and wiring, connection between distribution frame and HUB or switch
